The Multiple Link Controller is programmed using GUI based screen menus. The sample screen shown below illustrates the configuration setup of the Receiver / Transmitter links. By clicking on the connection point, links can be established based on either NAC code, CTCSS, DTMF or COR steering. For each transmitter column a priority can be set based on the received signal to give high priority to a single receiver. Channel selection may be set for any link using NAC or CTCSS tones.

Go to the MLCS Download Page to download the latest version.

 

Multiple Link Controller Software

Each box has the capability of enabling its designated path in various conditions. For example the Rx A to Tx A path can be enabled with 5 NAC codes. Using a NAC code of $999* as the All Call Code, if Rx A is keyed up with $999 it will key all its designated transmitters but if it receives a code of $103 it will only key Tx A and Tx C as programmed.

* NAC Codes are expressed in Hexadecimal format - $xxx